This industrial O-ring features a robust Viton elastomer seal encased in a 316 stainless steel housing. Engineered for superior chemical and temperature resistance, ensuring reliable sealing in demanding applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.770" |
| Outside Diameter | 7.973" |
| Cross Section | 0.231" |
A high-performance industrial component, this Viton O-ring is constructed with a precisely machined 316 stainless steel outer housing for enhanced durability and chemical inertness. The internal Viton elastomer provides exceptional resilience to aggressive chemicals, high temperatures (up to 400°F/204°C), and low compression set. With an inside diameter of 0.770 inches, an outside diameter of 7.973 inches, and a cross-section of 0.231 inches, this O-ring is designed for critical sealing applications where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can damage the O-ring or sealing surface. | Handle the O-ring with care and use appropriate tools for installation to prevent damage. |
| Incorrectly identifying the O-ring size or material for the application, leading to premature failure. | Always verify the required O-ring specifications against the application's environmental conditions and dimensional requirements. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, High-Temperature Fluid Systems, Aerospace and Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||