Engineered for superior sealing in aggressive industrial applications, this Viton O-Ring features a robust 316 stainless steel housing. It offers exceptional resistance to extreme temperatures, chemicals, and harsh operating conditions.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.297" |
| Outside Diameter | 0.532" |
| Cross Section | 0.198" |
Designed for demanding industrial environments, this O-ring boasts a precise 1.297" inside diameter, 0.532" outside diameter, and a 0.198" cross-section. The Viton elastomer provides excellent resilience, low compression set, and broad chemical compatibility, including fuels, oils, and many acids. The 316 stainless steel housing ensures superior structural integrity and corrosion resistance, making it ideal for high-pressure and high-temperature systems where reliability is paramount. This combination guarantees long-term sealing performance in challenging operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully slide the O-ring over the fitting or component, avoiding stretching. 3. Apply a light coating of compatible lubricant if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to excessive compression and premature failure. | Tighten fasteners to the manufacturer's recommended torque specifications. |
| Using incompatible lubricants that degrade the Viton elastomer. | Consult the O-ring and equipment manufacturer for a list of approved lubricants. |
| Installing the O-ring with twists or kinks, compromising the seal. | Ensure the O-ring is seated flat and uniformly in its groove before assembly. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Hydraulic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||