This industrial-grade Viton O-ring is engineered for superior sealing performance in demanding environments. Its exceptional resilience and chemical resistance make it ideal for critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.444" |
| Outside Diameter | 8.930" |
| Cross Section | 0.196" |
Purpose-built for heavy-duty applications, this Viton O-ring offers an inside diameter of 0.444 inches, an outside diameter of 8.930 inches, and a cross-section of 0.196 inches. The Viton (Fluorocarbon elastomer) material provides outstanding resistance to a wide range of chemicals, oils, fuels, and high temperatures up to 400°F (200°C), making it suitable for hydraulic systems, automotive, aerospace, and chemical processing equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully insert the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, consistent pressure and ensure the O-ring seats properly without deformation. |
| Using an incompatible lubricant that degrades the Viton material. | Consult material compatibility charts and use only lubricants specifically approved for Viton. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Hydraulic systems, Chemical processing, Automotive fuel systems, Aerospace components, High-temperature sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||