This industrial Viton O-ring, encased in durable 304 stainless steel, offers exceptional sealing performance in demanding environments. Its robust construction ensures reliability under extreme pressures and temperatures, preventing leakage in critical systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.269" |
| Outside Diameter | 4.273" |
| Cross Section | 0.170" |
Precision-manufactured to tight tolerances, this Viton O-ring features a 9.269" inside diameter, a 4.273" outside diameter, and a 0.170" cross-section. The Viton elastomer provides excellent resistance to a wide range of chemicals, oils, and high temperatures (up to 400°F/204°C), while the 304 stainless steel housing offers corrosion resistance and structural integrity. This combination makes it ideal for chemical processing, automotive, aerospace, and oil and gas industries where reliable, long-lasting seals are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully insert the O-ring into its designated groove, ensuring it sits flat without twisting. 3. Assemble the mating component, applying even pressure to seat the O-ring properly and achieve a seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring. | Adhere to specified torque values for all fasteners to prevent O-ring damage. |
| Using incorrect lubricant, degrading the Viton. | Use only O-ring compatible lubricants, such as silicone grease or PTFE-based lubricants. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems, Oil & Gas Exploration Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||