This industrial Viton O-Ring, encased in robust 304 stainless steel, offers superior sealing in demanding applications. Its precision dimensions ensure a reliable, leak-proof seal under extreme pressures and temperatures.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.269" |
| Outside Diameter | 8.844" |
| Cross Section | 0.137" |
Built to exacting engineering tolerances, this Viton O-Ring boasts an Inside Diameter of 9.269 inches and an Outside Diameter of 8.844 inches, with a precise Cross Section of 0.137 inches. The Viton elastomer provides exceptional resistance to a wide range of chemicals, fuels, and high temperatures (up to 400°F / 204°C), while the 304 stainless steel casing enhances its structural integrity and offers protection against corrosion and mechanical damage in aggressive industrial environments. Ideal for applications in chemical processing, automotive, and aerospace industries where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Apply even pressure during assembly to seat the O-ring without pinching or deforming it.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or compression set. | Adhere to specified torque values and use proper assembly techniques to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Always consult a compatibility chart and use only lubricants and cleaning agents specifically recommended for Viton elastomers. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||