Engineered for extreme environments, this industrial Viton O-ring features a robust 304 stainless steel housing. It delivers exceptional sealing integrity and chemical resistance in demanding operational settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.081" |
| Outside Diameter | 4.518" |
| Cross Section | 0.121" |
Purpose-built for heavy-duty applications, this industrial O-ring combines the superior chemical and temperature resistance of Viton fluoroelastomer with the structural integrity of a 304 stainless steel housing. The precise dimensions of a 9.081" inside diameter, 4.518" outside diameter, and a 0.121" cross-section ensure a tight, reliable seal in high-pressure and corrosive fluid applications. This combination makes it ideal for chemical processing, oil and gas, and automotive systems where standard elastomers may fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove for cleanliness and damage. 2. Carefully position the O-ring within the groove, ensuring no twists or pinch points. 3. Apply a thin layer of compatible lubricant if recommended for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Gently flex and guide the O-ring into the groove, utilizing appropriate installation tools if necessary. |
| Installing on a dirty or damaged sealing surface. | Thoroughly clean and inspect the groove before O-ring installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Oil and Gas Exploration, Automotive Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||