This industrial O-ring features premium Viton sealing material encased in a robust 304 stainless steel housing. Engineered for exceptional chemical and temperature resistance, ensuring reliable performance in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.972" |
| Outside Diameter | 0.689" |
| Cross Section | 0.129" |
A high-performance industrial component, this Viton O-ring is meticulously manufactured with an Inside Diameter of 6.972 inches, an Outside Diameter of 0.689 inches, and a precise Cross Section of 0.129 inches. The Viton elastomer offers superior resistance to a wide array of chemicals, oils, and high temperatures, while the 304 stainless steel housing provides excellent structural integrity and corrosion resistance. This combination makes it ideal for demanding applications where extreme conditions are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into its designated groove, avoiding overstretching. 3. Assemble the components, applying even pressure to achieve a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature seal failure. | Adhere to specified torque values for all fasteners to prevent over-compression of the O-ring. |
| Using incompatible cleaning agents that degrade the Viton material. | Consult the chemical resistance chart for Viton and use only approved cleaning solvents. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||