This industrial O-ring, featuring a Viton elastomer seal and a robust 304 stainless steel housing, offers superior chemical and thermal resistance for critical sealing applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.579" |
| Outside Diameter | 6.124" |
| Cross Section | 0.168" |
Manufactured under strict quality controls, this industrial O-ring combines the exceptional chemical inertness and wide temperature range of Viton with the corrosion resistance of 304 stainless steel. The precise dimensions, including an inside diameter of 6.579 inches, an outside diameter of 6.124 inches, and a cross-section of 0.168 inches, ensure a reliable seal in high-pressure and aggressive media environments. This design is ideal for applications requiring long-term durability and resistance to fuels, oils, solvents, and extreme temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free from debris. 2. Carefully position the O-ring within the groove, avoiding any stretching or twisting. 3. Apply a light lubricant compatible with Viton if necessary for easier installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening of fasteners, leading to O-ring extrusion. | Follow recommended torque specifications for mating components. |
| Using incompatible lubricants or cleaning agents, degrading the Viton. | Consult material compatibility charts for approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Petroleum and gas industry, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||