Engineered for extreme environments, this Viton O-Ring with a robust 304 stainless steel housing provides superior sealing in high-temperature and chemically aggressive applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 5.811" |
| Outside Diameter | 10.517" |
| Cross Section | 0.245" |
Trusted by engineers across multiple sectors, this industrial O-ring features a Viton elastomer for exceptional resistance to heat, chemicals, and fuels, ensuring reliable sealing performance. The precision-machined 304 stainless steel housing offers enhanced structural integrity and corrosion resistance, making it ideal for demanding operational conditions. With an Inside Diameter of 5.811 inches, an Outside Diameter of 10.517 inches, and a Cross Section of 0.245 inches, this assembly is designed for critical sealing duties in fluid power, chemical processing, and automotive systems where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant as per application requirements. 3. Install the O-ring into the groove, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that can degrade Viton. | Always consult material compatibility charts and use lubricants specifically approved for Viton elastomers. |
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care and ensure it is installed without excessive stress to prevent premature failure. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: High-temperature fluid systems, Chemical processing equipment, Automotive fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||