This industrial-grade Viton O-Ring, integrated within a robust 304 Stainless Steel housing, delivers exceptional sealing performance. Engineered for high-temperature and chemically aggressive environments, ensuring reliable fluid containment.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.357" |
| Outside Diameter | 4.319" |
| Cross Section | 0.233" |
Specified by design engineers worldwide, this Viton O-Ring boasts an impressive 4.319" outside diameter and a 0.357" inside diameter, with a 0.233" cross-section. The 304 stainless steel housing provides superior corrosion resistance and structural integrity. Viton (FKM) material offers excellent resistance to a broad spectrum of chemicals, fuels, oils, and extreme temperatures ranging from -20°F to +400°F (-29°C to +204°C). Ideal for applications requiring dependable sealing under severe operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring into its designated groove, avoiding any stretching or twisting. 3. Apply even, consistent pressure during assembly to achieve a proper seal without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension, allowing it to sit naturally in its groove. |
| Installing onto dirty or damaged mating surfaces. | Thoroughly clean and inspect all sealing surfaces before O-ring installation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||