Engineered for extreme environments, this Viton O-ring, reinforced with a 304 stainless steel housing, provides superior chemical and temperature resistance for critical sealing duties.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.176" |
| Outside Diameter | 8.069" |
| Cross Section | 0.192" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts a 3.176" inside diameter, an 8.069" outside diameter, and a 0.192" cross-section. The Viton elastomer offers exceptional resistance to aggressive chemicals, high temperatures (up to 400°F/204°C), and UV degradation, while the 304 stainless steel exterior provides robust mechanical support and corrosion resistance in harsh industrial settings. This combination ensures reliable, long-lasting sealing performance in demanding fluid power, chemical processing, and aerospace applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections before installation. 3. Lubricate the O-ring and groove with a compatible lubricant to facilitate smooth insertion and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring extrusion or damage. | Apply steady, even pressure and utilize appropriate tools for insertion, ensuring the O-ring seats correctly within the groove. |
| Incorrect lubricant selection, causing premature O-ring degradation or swelling. | Always consult the O-ring material compatibility chart and use only lubricants specified for Viton and the operating environment. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Hydraulic Systems, Aerospace and Aviation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||