This industrial O-ring features a Viton seal combined with a robust 304 stainless steel housing. Engineered for superior chemical resistance and high-temperature performance, it ensures reliable, long-lasting sealing in critical applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.696" |
| Outside Diameter | 10.925" |
| Cross Section | 0.169" |
Precision-manufactured to tight tolerances, this O-ring boasts an Inside Diameter of 2.696", an Outside Diameter of 10.925", and a Cross Section of 0.169". The Viton elastomer provides exceptional resistance to aggressive chemicals, oils, and fuels, while the 304 stainless steel housing offers excellent corrosion resistance and structural integrity. This combination makes it ideal for demanding environments requiring reliable sealing against extreme pressures and temperatures. The specific dimensions ensure a precise fit within designed groove geometries, minimizing leakage potential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect both the O-ring and the groove for debris, damage, or imperfections. 2. Apply a thin, compatible lubricant to the O-ring and the groove surface to facilitate installation and prevent damage. 3. Carefully install the O-ring into the designated groove, ensuring it sits flat and is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Twisting or pinching the O-ring during installation. | Ensure the O-ring is laid into the groove without forcing, allowing it to seat naturally. Use lubricant to aid smooth insertion. |
| Using an incompatible lubricant that degrades the Viton material. | Consult the material compatibility chart for Viton to select a lubricant that will not cause swelling or degradation. |
| Installing the O-ring into a dirty or damaged groove. | Thoroughly clean the groove and inspect it for any sharp edges, burrs, or debris that could cut or abrade the O-ring. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||