This robust Viton O-ring, reinforced with 304 stainless steel, delivers exceptional sealing performance in extreme industrial environments. Engineered for reliability and durability, it ensures leak-free operation under pressure and chemical exposure.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.123" |
| Outside Diameter | 10.750" |
| Cross Section | 0.246" |
Built to exacting engineering tolerances, this industrial O-ring features a precise 1.123-inch inside diameter, a 10.750-inch outside diameter, and a 0.246-inch cross-section. The Viton elastomer provides superior resistance to high temperatures, aggressive chemicals, and harsh solvents, while the 304 stainless steel encapsulation enhances its structural integrity and resistance to extrusion under high pressure. This combination makes it ideal for critical sealing applications in petrochemical, aerospace, and heavy manufacturing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of any debris or damage. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections. 3. Gently install the O-ring into the groove, avoiding excessive stretching or twisting. Lubrication with a compatible medium may be required for ease of installation and optimal sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the groove, leading to improper compression and leakage. | Always verify the O-ring dimensions (ID, OD, and cross-section) against the groove specifications before installation. |
| Over-stretching or twisting the O-ring during installation, which can cause premature failure and leakage. | Install the O-ring smoothly into the groove without forcing it. Use appropriate tools or lubrication if necessary. |
| Installing on a dirty or damaged groove, compromising the seal integrity. | Thoroughly clean and inspect the sealing groove for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: High-temperature chemical processing, Petrochemical and oil & gas exploration, Aerospace hydraulic and fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||