Engineered for exceptional chemical resistance and high-temperature performance, this Viton O-ring, housed in 304 stainless steel, provides reliable sealing in critical industrial applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.930" |
| Outside Diameter | 4.918" |
| Cross Section | 0.171" |
Built to exacting engineering tolerances, this Viton O-ring features a precise Inside Diameter of 0.930 inches, an Outside Diameter of 4.918 inches, and a robust 0.171-inch cross-section. The Viton material offers outstanding resistance to a broad spectrum of chemicals, fuels, and aggressive media, while maintaining flexibility and sealing integrity across a wide temperature range (-20°F to +400°F). The 304 stainless steel housing ensures excellent corrosion resistance and structural support, making it ideal for high-pressure and corrosive fluid systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully compress the O-ring into its groove, avoiding stretching or twisting. 3. Verify proper seating and compression before applying system pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently guide the O-ring into its groove without excessive tension to prevent premature failure and loss of sealing capability. |
| Incorrect O-ring size for the groove. | Always verify the O-ring dimensions (ID, OD, cross-section) against the groove dimensions to ensure a proper interference fit and effective seal. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||