This industrial Viton O-ring, encased in robust 304 stainless steel, offers superior sealing performance. Engineered for demanding environments, it provides exceptional resistance to chemicals and extreme temperatures.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.734" |
| Outside Diameter | 1.813" |
| Cross Section | 0.223" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter (ID) of 0.734 inches, an Outside Diameter (OD) of 1.813 inches, and a Cross Section (CS) of 0.223 inches. The Viton material (FKM) offers excellent resistance to a wide range of chemicals, oils, fuels, and high temperatures up to 400°F (200°C), while the 304 stainless steel housing ensures structural integrity and corrosion resistance in aggressive media. This combination makes it ideal for critical sealing applications in aerospace, automotive, chemical processing, and oil & gas industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant (e.g., silicone grease). 3. Carefully install the O-ring into its designated groove, avoiding excessive stretching or twisting. 4. Verify proper seating and compression of the O-ring before assembly completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants, which can degrade Viton. | Always use lubricants specifically rated for Viton (FKM) compatibility. |
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring gently and ensure it seats evenly without distortion. |
| Installing on contaminated or damaged sealing surfaces. | Thoroughly clean and inspect all sealing surfaces prior to installation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems, Oil & Gas Downhole Tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||