This industrial Viton O-ring, encased in a durable 304 stainless steel housing, provides superior sealing performance. Engineered for critical applications requiring exceptional chemical and temperature resistance.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 0.703" |
| Outside Diameter | 5.416" |
| Cross Section | 0.218" |
Built to exacting engineering tolerances, this Viton O-ring boasts an Inside Diameter of 0.703 inches, an Outside Diameter of 5.416 inches, and a Cross Section of 0.218 inches. The Viton elastomer offers excellent resistance to a wide range of chemicals, fuels, and high temperatures, while the 304 stainless steel housing provides structural integrity and corrosion resistance. This combination ensures reliable, long-lasting seals in demanding industrial fluid power systems, chemical processing, and automotive applications where performance under duress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully inspect the O-ring and groove for any damage or imperfections. 3. Lubricate the O-ring and groove lightly with a compatible lubricant, then install the O-ring into its designated groove, avoiding twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Always use a lubricant and avoid excessive force; the O-ring should fit snugly without deformation. |
| Using incompatible lubricants or cleaning agents. | Consult chemical compatibility charts for Viton and 304 stainless steel to select appropriate materials. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||