This industrial-grade Viton O-ring, constructed from robust polycarbonate, provides exceptional sealing performance. Its precise dimensions ensure a secure fit in demanding applications, resisting extreme environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 4.773" |
| Outside Diameter | 3.408" |
| Cross Section | 0.238" |
Manufactured under strict quality controls, this Viton O-ring exhibits superior resilience and chemical inertness, critical for high-performance sealing. The material, polycarbonate, offers excellent resistance to a wide range of chemicals, oils, and solvents, along with a broad operating temperature range. The specified dimensions of 4.773" Inside Diameter, 3.408" Outside Diameter, and a 0.238" Cross Section are held to tight tolerances, ensuring reliable, leak-free performance in critical hydraulic, pneumatic, and fluid handling systems. This makes it ideal for environments requiring chemical stability and thermal endurance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean sealing surfaces thoroughly to remove any debris or contaminants. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, ensuring it is seated without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Viton material. | Consult the material compatibility chart for appropriate lubricants or use a lubricant specifically recommended for Viton. |
| Over-stretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring with care, ensuring it is correctly positioned in the groove without excessive tension. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, High-Temperature Fluid Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||