This industrial O-ring, constructed from robust carbon steel with a Viton sealing element, offers exceptional resistance to chemicals and extreme temperatures. Designed for critical sealing applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.522" |
| Outside Diameter | 10.420" |
| Cross Section | 0.100" |
Engineered for reliability and performance, this Viton O-ring features an Inside Diameter of 2.522 inches, an Outside Diameter of 10.420 inches, and a precise Cross Section of 0.100 inches. The carbon steel housing provides structural integrity and robust sealing capabilities, while the Viton compound offers superior resistance to aggressive chemicals, oils, fuels, and high operating temperatures up to 400°F (204°C). This combination makes it ideal for high-pressure hydraulic systems, automotive applications, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, free of debris, and properly dimensioned according to the O-ring's specifications. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting, and ensure it sits flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or nicks on the O-ring. | Apply gentle, even pressure and utilize appropriate tools if necessary to avoid damaging the sealing surface. |
| Incorrect O-ring size selection, resulting in leakage or over-compression. | Always verify the O-ring's dimensions (ID, OD, CS) against the groove specifications before installation. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic Systems, Chemical Processing, Automotive Engine Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||