This industrial Viton O-ring, featuring a brass element for enhanced conductivity and corrosion resistance, provides exceptional sealing in demanding applications. Its superior material properties ensure reliability and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.511" |
| Outside Diameter | 8.214" |
| Cross Section | 0.114" |
A high-performance industrial component, this Viton O-ring boasts a precise Inside Diameter of 8.511 inches, an Outside Diameter of 8.214 inches, and a Cross Section of 0.114 inches. The Viton material offers outstanding resistance to high temperatures, aggressive chemicals, oils, and fuels, making it ideal for applications in chemical processing, automotive, aerospace, and oil & gas industries where extreme operating conditions are prevalent. The brass component enhances electrical conductivity and provides localized corrosion resistance in specific environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force that could nick or cut the material. 3. Position the O-ring squarely within its designated groove for optimal compression and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the O-ring into a groove that is too small, causing damage. | Select an O-ring with dimensions compatible with the groove or use an appropriate installation tool for larger diameters. |
| Installing an O-ring into a contaminated groove, leading to premature seal failure. | Thoroughly clean the groove and inspect for any burrs or sharp edges before installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems, Oil and Gas Exploration Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||