This industrial Viton O-ring provides exceptional sealing integrity in aggressive environments. Engineered for durability, its robust material composition ensures reliable performance under extreme temperature and chemical exposure.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.506" |
| Outside Diameter | 8.398" |
| Cross Section | 0.170" |
Engineered for reliability and performance, this Viton O-ring is precisely manufactured with an inside diameter of 4.506 inches, an outside diameter of 8.398 inches, and a cross-section of 0.170 inches. Viton, a high-performance fluoroelastomer, offers outstanding resistance to a broad spectrum of chemicals, oils, fuels, and high temperatures up to 400°F (204°C). Its low compression set ensures sustained sealing force over extended periods, making it ideal for critical static and dynamic sealing applications where leakage is unacceptable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring to fit over the component, avoiding excessive stretching or nicking. 3. Gently seat the O-ring into the groove, ensuring it is fully contained without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, leading to O-ring extrusion or premature failure. | Adhere to specified torque values and assembly procedures to prevent over-compression of the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Consult material compatibility charts and use only lubricants and cleaning agents specifically recommended for Viton. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||