This industrial O-ring features premium Viton material for exceptional chemical resistance and high-temperature sealing capabilities. Its robust brass construction ensures reliable performance in challenging environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.458" |
| Outside Diameter | 2.990" |
| Cross Section | 0.202" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 6.458 inches, an Outside Diameter of 2.990 inches, and a Cross Section of 0.202 inches. The Viton (FKM) elastomer provides superior resistance to a broad spectrum of chemicals, oils, and extreme temperatures ranging from -20°F to +400°F (-29°C to +204°C). The brass gland material offers excellent corrosion resistance and compatibility with specific fluid mediums. These attributes make it suitable for static and dynamic sealing applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly machined to the specified dimensions. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully place the O-ring into the groove, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle, even pressure. Utilize O-ring installation tools if necessary for complex or tight fits. |
| Installing into a dirty or damaged groove, compromising the seal. | Thoroughly inspect and clean the sealing groove before installation. Address any imperfections or damage. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||