This industrial-grade Viton O-ring provides superior sealing performance in harsh environments. Its robust material composition ensures exceptional resistance to chemicals, heat, and pressure, making it ideal for critical sealing applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.076" |
| Outside Diameter | 1.411" |
| Cross Section | 0.182" |
Specified by design engineers worldwide, this Viton O-ring boasts an inside diameter of 2.076 inches, an outside diameter of 1.411 inches, and a precise cross-section of 0.182 inches. Engineered from fluoroelastomer (FKM), commonly known as Viton®, it offers exceptional resistance to a broad spectrum of aggressive chemicals, oils, fuels, and extreme temperatures ranging from -15°F to +400°F (-26°C to +204°C). Its inherent low compression set ensures long-term sealing integrity, vital for preventing leaks in high-pressure hydraulic systems, automotive components, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of burrs or sharp edges. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, ensuring it sits flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and loss of sealing capability. |
| Using incompatible lubricants or cleaning agents. | Always verify lubricant and cleaning agent compatibility with Viton to prevent material degradation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Aerospace Fuel Systems, Automotive Engine Seals, Chemical Processing Equipment, Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||