Engineered for extreme environments, this Viton O-ring with a 316 stainless steel housing provides superior sealing integrity. Its robust construction ensures reliable performance under high pressure and temperature, making it indispensable for critical industrial fluid handling.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.712" |
| Outside Diameter | 6.029" |
| Cross Section | 0.157" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an inside diameter of 1.712 inches, an outside diameter of 6.029 inches, and a precise 0.157-inch cross-section. The Viton elastomer offers exceptional resistance to a wide range of chemicals, fuels, oils, and aggressive media, while maintaining flexibility across a broad temperature spectrum (-20°F to +400°F). The 316 stainless steel material provides excellent corrosion resistance, particularly in saline or acidic environments, ensuring longevity and preventing premature material degradation in demanding industrial settings. This combination makes it suitable for high-pressure hydraulic systems, chemical processing, automotive fuel systems, and aerospace applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the O-ring and mating groove for cleanliness and damage. Ensure both are free from debris, burrs, or imperfections. 2. Lightly lubricate the O-ring with a compatible lubricant recommended for Viton and the fluid being sealed. 3. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting. Ensure it sits evenly and without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle, even pressure. Utilize appropriate installation tools if necessary, ensuring they do not nick or cut the O-ring. |
| Incorrect lubricant selection, causing O-ring swelling or degradation. | Always refer to compatibility charts for lubricants suitable for Viton and the specific application fluid. |
| Installing into a dirty or damaged groove, compromising the seal. | Thoroughly clean and inspect the groove before installation. Address any surface imperfections. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Plants, High-Pressure Hydraulic Systems, Automotive Fuel and Emission Control Systems, Aerospace Fluid Handling, Oil and Gas Exploration Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||