This industrial Viton O-Ring, encased in 304 stainless steel, offers superior chemical and temperature resistance for critical sealing applications. Engineered for reliability and longevity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.759" |
| Outside Diameter | 6.073" |
| Cross Section | 0.268" |
Built to exacting engineering tolerances, this Viton O-Ring features an inside diameter of 0.759 inches, an outside diameter of 6.073 inches, and a precise cross-section of 0.268 inches. The 304 stainless steel housing provides exceptional corrosion resistance and structural integrity, making it ideal for environments exposed to aggressive chemicals, extreme temperatures, and high pressures. This combination ensures a reliable seal in demanding industrial settings, minimizing leakage and downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure both mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove, ensuring it is not twisted. 3. Assemble the components, applying even pressure to seat the O-ring without pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can crush the O-ring. | Tighten fasteners to the manufacturer's specified torque values. |
| Using excessive lubrication that is incompatible with Viton. | Consult compatibility charts for appropriate lubricants. |
| Installing a twisted or pinched O-ring. | Visually inspect the O-ring for proper seating before assembly. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Hydraulic and pneumatic systems, High-temperature fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||