This industrial O-ring, constructed from robust Viton, provides exceptional sealing performance in extreme environments. Engineered for durability and chemical resistance, it ensures reliable operation across a wide temperature range.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.674" |
| Outside Diameter | 10.143" |
| Cross Section | 0.165" |
Manufactured under strict quality controls, this industrial O-ring boasts an inside diameter of 2.674 inches, an outside diameter of 10.143 inches, and a precise cross-section of 0.165 inches. The Viton material offers superior resistance to high temperatures, aggressive chemicals, oils, and fuels, making it ideal for critical sealing applications where standard elastomers fail. Its excellent compression set resistance ensures long-term sealing integrity and reduced maintenance cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or contaminants. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can cause excessive compression and premature O-ring failure. | Adhere to specified torque values for all fasteners to maintain proper compression. |
| Using incompatible lubricants or cleaning agents that can degrade the Viton material. | Always consult material compatibility charts and use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||