Engineered for critical applications, this Viton O-ring provides superior sealing performance. Its robust construction ensures reliable operation in harsh environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.391" |
| Outside Diameter | 2.143" |
| Cross Section | 0.226" |
A high-performance industrial component, this Viton O-ring (Nylon material designation) is precision manufactured to exacting standards, featuring an Inside Diameter (ID) of 4.391 inches, an Outside Diameter (OD) of 2.143 inches, and a Cross Section (CS) of 0.226 inches. The inherent properties of Viton (FKM) rubber offer exceptional resistance to high temperatures, a broad spectrum of chemicals, fuels, oils, and ozone, making it ideal for applications demanding longevity and reliability under extreme conditions. This specification ensures minimal leakage and maximum service life in dynamic and static sealing scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove and O-ring are clean and free from debris or damage. 2. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting. 3. Verify proper seating and compression of the O-ring within the groove before assembly. 4. Apply a suitable lubricant if recommended for the specific application and material compatibility.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to overcompression and premature failure. | Install the O-ring to the specified compression range, typically 10-25% of the cross-sectional diameter, ensuring proper sealing without excessive stress. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Always consult chemical compatibility charts and use only approved lubricants and cleaning agents specifically designed for Viton (FKM) elastomers. |
| Incorrectly sized O-ring installation leading to leaks or extrusion. | Verify the O-ring dimensions match the groove specifications precisely. Ensure the O-ring is installed without twists or kinks. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment, High-temperature industrial machinery, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||