Engineered for critical applications, this industrial Viton O-ring features a robust 316 stainless steel housing, delivering exceptional chemical and temperature resistance for reliable, long-term sealing.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.038" |
| Outside Diameter | 10.693" |
| Cross Section | 0.239" |
Trusted by engineers across multiple sectors, this industrial O-ring is constructed with a high-performance Viton elastomer encapsulated within a precision-machined 316 stainless steel housing. The substantial dimensions – an inside diameter of 4.038", an outside diameter of 10.693", and a cross-section of 0.239" – ensure a robust seal in demanding environments. The 316 stainless steel provides superior corrosion resistance and mechanical integrity, making it ideal for high-pressure, chemically aggressive, and extreme temperature applications where standard O-rings would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both sealing surfaces and the O-ring groove to remove any debris, oil, or old sealant. 2. Inspect the O-ring for any nicks, cuts, or defects before installation. 3. Carefully install the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion. | Adhere to specified torque values for all fasteners to prevent over-compression and extrusion. |
| Using incompatible cleaning agents that degrade the Viton elastomer. | Consult the Viton chemical resistance chart and use only approved cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, High-Temperature Hydraulic Systems, Aerospace Fluid Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||