This industrial Viton O-ring, encapsulated in robust 304 stainless steel, offers superior chemical and temperature resistance for critical sealing applications requiring extreme durability and reliability.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.485" |
| Outside Diameter | 1.345" |
| Cross Section | 0.151" |
Built to exacting engineering tolerances, this Viton O-ring (6.485" Inside Diameter, 1.345" Outside Diameter, 0.151" Cross Section) is engineered for exceptional performance. The Viton material provides excellent resistance to a wide range of chemicals, fuels, and extreme temperatures (-20°F to +400°F), while the 304 stainless steel housing offers superior corrosion resistance and structural integrity. This combination ensures a reliable seal in demanding environments, preventing leaks and maintaining system integrity in hydraulic, pneumatic, and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring to remove any debris or contaminants. 2. Lubricate the O-ring and the groove with a compatible lubricant recommended for the specific fluid and O-ring material. 3. Carefully install the O-ring into the groove, ensuring it is seated properly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can lead to O-ring damage. | Apply controlled, even pressure. Utilize lubrication to ease installation and prevent tearing. |
| Incorrect O-ring size or material selection for the application. | Verify O-ring dimensions and material compatibility with the system's operating fluids and temperatures before ordering and installation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: High-temperature chemical processing, Fuel and oil handling systems, Hydraulic and pneumatic cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||