This industrial Viton O-ring, designed for brass fittings, offers exceptional chemical and thermal resistance. Its precise dimensions ensure a secure, leak-proof seal in challenging environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.624" |
| Outside Diameter | 4.314" |
| Cross Section | 0.257" |
Engineered for reliability and performance, this Viton O-ring features a precise 1.624-inch inside diameter, a 4.314-inch outside diameter, and a 0.257-inch cross-section, ensuring a perfect fit within its designated brass housing. Crafted from high-grade Viton (FKM), it exhibits superior resistance to aggressive chemicals, high temperatures (up to 400°F/200°C), and ozone, making it suitable for hydraulic systems, fuel lines, and chemical processing equipment where standard elastomers would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass fitting groove is clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, ensuring it sits evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Always use lubricants specifically rated for Viton compatibility. |
| Twisting the O-ring during installation, leading to premature failure. | Install the O-ring smoothly and evenly into the groove, avoiding any twisting motion. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic Systems, Fuel and Oil Systems, Chemical Processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||