This industrial-grade Viton O-ring offers superior sealing performance in extreme environments. Its robust construction ensures reliable containment of fluids and gases under high pressure and temperature variations.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.307" |
| Outside Diameter | 0.390" |
| Cross Section | 0.106" |
Specified by design engineers worldwide, this Viton O-ring is engineered for exceptional performance in critical sealing applications. With an inside diameter of 6.307 inches, an outside diameter of 0.390 inches, and a precise 0.106-inch cross-section, it meets stringent dimensional tolerances. The Viton (FKM) material provides outstanding resistance to a broad spectrum of chemicals, oils, fuels, and high temperatures up to 400°F (204°C), making it ideal for aerospace, automotive, and chemical processing industries where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting. 3. Verify the O-ring is seated evenly and without pinching before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Use appropriate O-ring installation tools and ensure the O-ring is only stretched the minimum amount necessary to fit the groove. |
| Using incompatible lubricants, leading to material degradation. | Always consult chemical compatibility charts for the specific Viton grade and the intended application to select the correct lubricant. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: High-temperature fluid handling systems, Chemical processing equipment, Aerospace and automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||