This industrial O-ring, crafted from resilient Viton, offers exceptional sealing in high-temperature and chemically aggressive environments. Its precise dimensions ensure a secure fit for critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.317" |
| Outside Diameter | 7.338" |
| Cross Section | 0.130" |
Engineered for reliability and performance, this Viton O-ring boasts a nominal inside diameter of 9.317 inches, an outside diameter of 7.338 inches, and a cross-section of 0.130 inches. Viton's superior resistance to a broad spectrum of chemicals, including fuels, oils, and many acids, combined with its excellent thermal stability up to 400°F (204°C), makes it the material of choice for demanding industrial sealing challenges where standard elastomers would fail. Its low compression set ensures long-term sealing integrity under sustained pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating groove surfaces are clean and free of debris. 2. Lubricate O-ring lightly with a compatible lubricant if necessary. 3. Carefully install O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant. | Always use a lubricant compatible with Viton and the system fluid to prevent degradation. |
| Overstretching the O-ring during installation. | Install the O-ring without excessive stretching to maintain its sealing properties and prevent premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||