This industrial Viton O-ring, reinforced with 316 stainless steel, offers superior chemical resistance and sealing integrity for high-pressure and high-temperature environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.289" |
| Outside Diameter | 7.985" |
| Cross Section | 0.269" |
Manufactured under strict quality controls, this robust O-ring features a precise 1.289" inside diameter, 7.985" outside diameter, and a 0.269" cross-section. The Viton elastomer provides exceptional resistance to aggressive chemicals, fuels, oils, and high temperatures up to 400°F (200°C). The integrated 316 stainless steel housing enhances mechanical strength, preventing extrusion and ensuring long-term sealing performance in corrosive atmospheres and demanding industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Gently install the O-ring into its designated groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring compression and premature failure. | Tighten fasteners to the manufacturer's specified torque values. |
| Using incompatible lubricants that degrade the Viton material. | Consult chemical compatibility charts and use only approved lubricants for Viton. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||