This industrial-grade Viton O-ring, constructed from robust polycarbonate, ensures superior sealing performance. Designed for extreme environments, it provides exceptional resistance to chemicals and high temperatures, making it ideal for critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 7.343" |
| Outside Diameter | 6.854" |
| Cross Section | 0.258" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 7.343 inches, an Outside Diameter of 6.854 inches, and a Cross Section of 0.258 inches. The Viton material, integrated within a polycarbonate matrix, offers outstanding resistance to a broad spectrum of chemicals, fuels, and oils, alongside excellent thermal stability across a wide temperature range. This combination ensures reliable, long-lasting sealing in demanding industrial environments where standard elastomers would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of burrs or debris. 2. Carefully stretch the O-ring over the smaller diameter of the assembly, or install it into the groove if space permits. 3. Gently seat the O-ring fully within its designated groove, ensuring no twisting or pinching occurs.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring into a tight groove, leading to tearing or permanent deformation. | Apply a small amount of compatible lubricant to the O-ring and groove during installation to reduce friction and prevent damage. |
| Using an O-ring material not suited for the specific chemical or temperature exposure. | Always verify the chemical and temperature compatibility of the Viton O-ring with the intended application fluids and operating conditions. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||