Engineered for superior sealing performance, this industrial O-ring is constructed from durable Viton for exceptional resistance to heat, chemicals, and harsh operating conditions. Ensures reliable sealing in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.715" |
| Outside Diameter | 9.164" |
| Cross Section | 0.124" |
Designed for demanding industrial environments, this Viton O-ring offers robust sealing capabilities. With an Inside Diameter of 5.715 inches, an Outside Diameter of 9.164 inches, and a precise Cross Section of 0.124 inches, it is engineered for tight tolerances. Viton's inherent properties provide excellent resistance to high temperatures (up to 400°F/204°C), aggressive chemicals, fuels, and oils, making it ideal for applications in aerospace, automotive, oil & gas, and chemical processing industries where seal integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding overstretching or nicking the material. 3. Verify the O-ring is properly seated and not twisted before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to damage. | Apply gentle, consistent pressure to seat the O-ring, utilizing appropriate installation tools if necessary. |
| O-ring being twisted or improperly seated in the groove. | Visually inspect the O-ring to confirm it is flat and uniformly seated within the entire circumference of the groove. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||