This industrial O-ring, crafted from robust Viton, ensures exceptional sealing performance in harsh conditions. Its precise dimensions and durable construction make it ideal for critical applications requiring superior chemical and thermal resistance.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.325" |
| Outside Diameter | 10.845" |
| Cross Section | 0.192" |
Designed for demanding industrial environments, this Viton O-ring offers unparalleled resistance to a wide range of chemicals, oils, fuels, and high temperatures. With an inside diameter of 1.325 inches, an outside diameter of 10.845 inches, and a cross-section of 0.192 inches, it provides a reliable seal in pressure systems, hydraulic and pneumatic equipment, and automotive applications where extreme conditions are prevalent. The inherent properties of Viton, including its low compression set and excellent aging characteristics, guarantee long-term sealing integrity and operational reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from burrs or sharp edges. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, avoiding any stretching or twisting, ensuring it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive tension, allowing it to sit naturally in the groove. |
| Using an incompatible lubricant that degrades the Viton material. | Consult a compatibility chart and use only lubricants specifically recommended for Viton O-rings. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic Systems, Pneumatic Actuators, Automotive Fuel Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||