This industrial O-ring, crafted from high-grade Viton, ensures exceptional sealing performance. Its precise dimensions and robust material composition make it ideal for critical applications requiring resistance to extreme temperatures and harsh chemicals.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.548" |
| Outside Diameter | 10.512" |
| Cross Section | 0.153" |
Built to exacting engineering tolerances, this Viton O-ring features an inside diameter of 2.548 inches, an outside diameter of 10.512 inches, and a cross-section of 0.153 inches. The fluoroelastomer (FKM) composition provides outstanding resistance to a wide range of chemicals, fuels, oils, and elevated temperatures up to 400°F (204°C). Its low compression set ensures long-term sealing integrity in demanding environments, making it a preferred choice for hydraulic systems, automotive fuel systems, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, consistent pressure. If resistance is met, re-check groove cleanliness and O-ring placement. |
| Incorrect O-ring size selection for the groove dimensions. | Always verify the required O-ring dimensions against the groove specifications before installation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing, Automotive Fuel Systems, Aerospace, Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||