This industrial-grade Viton O-ring provides exceptional sealing performance in harsh environments. Its robust material composition ensures reliability across a wide temperature range and resistance to aggressive chemicals, making it ideal for critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.442" |
| Outside Diameter | 8.749" |
| Cross Section | 0.125" |
Specified by design engineers worldwide, this Viton O-ring (FKM) boasts superior chemical and thermal resistance, making it a premier choice for demanding industrial applications. With an inside diameter of 1.442 inches, an outside diameter of 8.749 inches, and a precise 0.125-inch cross-section, it ensures a tight and dependable seal. Viton's inherent properties, including low gas permeability and excellent resistance to fuels, oils, and a broad spectrum of chemicals, make this O-ring suitable for high-pressure, high-temperature hydraulic systems, automotive fuel systems, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs or debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant (refer to chemical compatibility chart). 3. Carefully install the O-ring into the designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incompatible lubricant that degrades the Viton material. | Always consult a chemical compatibility chart for lubricants recommended for Viton under your specific operating conditions. |
| Overstretching or twisting the O-ring during installation. | Install the O-ring gently, ensuring it sits flush within the groove without excessive tension. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Hydraulic Systems, Automotive Fuel and Oil Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||