This industrial Viton O-ring provides superior sealing performance in challenging environments. Engineered for exceptional resistance to chemicals, heat, and pressure, ensuring long-term reliability in critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.055" |
| Outside Diameter | 10.369" |
| Cross Section | 0.084" |
Manufactured under strict quality controls, this Viton O-ring features an Inside Diameter of 9.055 inches, an Outside Diameter of 10.369 inches, and a Cross Section of 0.084 inches. The fluoroelastomer (FKM) material, commonly known as Viton, offers exceptional resistance to a wide range of aggressive chemicals, fuels, oils, and high temperatures (up to 400°F / 204°C). Its low gas permeability and excellent compression set properties make it ideal for static and dynamic sealing applications in aerospace, automotive, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or pinching. | Follow torque specifications for fasteners and ensure proper groove design to prevent over-compression. |
| Using incompatible lubricants or cleaning agents, degrading the O-ring material. | Always verify lubricant and cleaning agent compatibility with Viton (FKM) before application. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||