This industrial-grade Viton O-ring delivers superior sealing performance in demanding applications. Engineered for exceptional chemical and heat resistance, ensuring reliable operation and extended service life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.928" |
| Outside Diameter | 5.559" |
| Cross Section | 0.265" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter (ID) of 7.928 inches, an Outside Diameter (OD) of 5.559 inches, and a precise Cross Section (CS) of 0.265 inches. Constructed from high-performance fluoroelastomer (Viton), it offers excellent resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures up to 400°F (204°C). This material's inherent properties make it suitable for critical sealing functions in aerospace, automotive, chemical processing, and oil & gas industries, where seal integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring with an appropriate solvent. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, ensuring it is seated squarely and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that degrade the Viton material. | Always use lubricants specifically recommended for Viton seals, such as silicone-based or fluorinated greases. |
| Overstretching or twisting the O-ring during installation. | Ensure the O-ring is gently rolled into place and not forced, which can cause premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: High-temperature hydraulic systems, Chemical processing equipment, Fuel and oil handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||