This industrial O-ring, constructed from premium Viton, provides exceptional sealing integrity in harsh environments. Its precise dimensions ensure a reliable fit, resisting aggressive chemicals and extreme temperatures for critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.595" |
| Outside Diameter | 1.359" |
| Cross Section | 0.261" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an inside diameter of 8.595 inches, an outside diameter of 1.359 inches, and a cross-section of 0.261 inches. Viton (Fluoroelastomer) offers outstanding resistance to a wide range of chemicals, including oils, fuels, solvents, and acids, as well as excellent thermal stability up to 400°F (204°C). This makes it ideal for demanding applications in the automotive, aerospace, chemical processing, and oil and gas industries where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could nick or cut the seal. 3. Seat the O-ring fully within its groove, verifying no twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or sharp tools during installation, leading to cuts or nicks in the O-ring. | Always use a suitable lubricant and gentle stretching techniques. Employ plastic or wooden installation tools if necessary. |
| Incorrect O-ring size or material selection for the application, resulting in leaks or premature failure. | Verify that the O-ring's dimensions precisely match the groove and that the material is chemically and thermally compatible with the operating environment. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical processing equipment, High-temperature hydraulic systems, Fuel and oil handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||