Engineered for demanding industrial environments, this Viton O-ring features a robust 316 stainless steel construction. Delivering exceptional chemical resistance and high-temperature performance, it ensures reliable sealing in critical applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.683" |
| Outside Diameter | 4.054" |
| Cross Section | 0.076" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts a precise Inside Diameter of 7.683 inches, an Outside Diameter of 4.054 inches, and a Cross Section of 0.076 inches. Constructed from premium Viton material, renowned for its exceptional resistance to a wide array of chemicals, fuels, oils, and extreme temperatures (up to 200°C / 392°F), it is further reinforced with a 316 stainless steel housing for superior structural integrity and corrosion resistance in aggressive media. This combination ensures long-term, reliable sealing performance in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully install the O-ring, avoiding excessive stretching or twisting. 3. Verify proper seating and compression to achieve a leak-free seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening of fasteners leading to O-ring extrusion. | Adhere to specified torque values for all fasteners to prevent over-compression and extrusion. |
| Using incompatible cleaning solvents that degrade the Viton material. | Consult chemical compatibility charts and use only recommended cleaning agents for Viton. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||