This industrial-grade Viton O-ring, housed within a robust carbon steel casing, delivers exceptional sealing performance. Its precise dimensions and superior material composition ensure reliability under extreme pressures and temperatures.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.013" |
| Outside Diameter | 8.527" |
| Cross Section | 0.109" |
A high-performance industrial component, this Viton O-ring boasts an Inside Diameter (ID) of 9.013 inches, an Outside Diameter (OD) of 8.527 inches, and a Cross Section (CS) of 0.109 inches. The Viton material offers excellent resistance to a broad spectrum of chemicals, fuels, oils, and high temperatures, making it ideal for challenging environments. The carbon steel housing provides structural integrity and enhances pressure containment, ensuring a secure and durable seal in critical hydraulic, pneumatic, and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris or damage. 2. Carefully position the O-ring within its designated groove, avoiding any stretching or twisting. 3. Apply a light coat of compatible lubricant if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring extrusion or tearing. | Apply gentle pressure and ensure the O-ring seats correctly in its groove without deformation. |
| Incorrectly sizing the O-ring for the groove, causing leaks or premature failure. | Verify the O-ring dimensions precisely match the groove specifications as per engineering drawings. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: High-temperature fluid systems, Chemical processing equipment, Automotive and aerospace fluid seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||