This premium Viton O-ring, featuring a durable brass construction, ensures exceptional sealing performance in extreme industrial environments. Its precise dimensions guarantee a secure fit and long-lasting reliability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.006" |
| Outside Diameter | 10.218" |
| Cross Section | 0.264" |
A high-performance industrial component, this Viton O-ring is engineered for critical sealing applications. It boasts an inside diameter of 8.006 inches, an outside diameter of 10.218 inches, and a substantial cross-section of 0.264 inches, providing excellent compression set resistance and superior chemical and temperature resistance inherent to Viton fluoroelastomers. The brass housing offers enhanced rigidity and conductivity where required, making it suitable for demanding fluid power, chemical processing, and high-temperature hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully inspect the O-ring for any damage before installation. 3. Lubricate the O-ring and groove with a compatible lubricant before gently pressing the O-ring into place.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can nick or cut the O-ring. | Apply a thin layer of compatible lubricant to the O-ring and groove, and use controlled, even pressure for installation. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly clean and inspect the sealing groove for any burrs, nicks, or foreign particles before proceeding with installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: High-temperature hydraulic systems, Chemical processing equipment, Fuel and oil handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||