This industrial-grade Viton O-ring is engineered for extreme operating conditions. Its robust construction ensures reliable sealing in high-pressure and chemically aggressive environments, offering exceptional durability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.779" |
| Outside Diameter | 9.798" |
| Cross Section | 0.179" |
Purpose-built for heavy-duty applications, this Viton O-ring boasts an inside diameter of 2.779 inches, an outside diameter of 9.798 inches, and a cross-section of 0.179 inches. The proprietary Viton formulation provides outstanding resistance to a wide range of chemicals, oils, fuels, and high temperatures (up to 400°F/204°C), making it ideal for demanding applications in the aerospace, automotive, and chemical processing industries where seal integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Verify proper seating and compression before reassembling the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring excessively during installation, leading to premature failure. | Install the O-ring without undue tension, allowing it to seat naturally within the groove. |
| Using incompatible lubricants that can degrade the Viton material. | Consult the O-ring manufacturer's compatibility chart for approved lubricants compatible with Viton. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic systems, Fuel systems, Chemical processing equipment, Aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||