This industrial-grade Viton O-ring provides exceptional sealing performance in aggressive chemical environments and extreme temperatures. Its robust material composition ensures long-term reliability and leak prevention across critical applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.550" |
| Outside Diameter | 8.764" |
| Cross Section | 0.140" |
Precision-manufactured to tight tolerances, this Viton O-ring features an Inside Diameter (ID) of 6.550 inches, an Outside Diameter (OD) of 8.764 inches, and a Cross Section (CS) of 0.140 inches. Composed of high-performance fluoroelastomer (FKM), commonly known as Viton, it exhibits outstanding resistance to a wide spectrum of chemicals, fuels, oils, and solvents, along with excellent thermal stability across a broad operating temperature range. This combination of dimensional accuracy and material resilience makes it ideal for sealing in demanding industrial machinery, automotive systems, and chemical processing equipment where standard elastomers would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free of debris or damage. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent tearing. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and use appropriate tools if necessary for difficult installations, ensuring the O-ring is not stretched or nicked. |
| Incorrect lubrication or using incompatible lubricants. | Always consult the O-ring manufacturer's compatibility chart for lubricants suitable for Viton and the specific application environment. |
| Installing on dirty or damaged mating surfaces. | Thoroughly clean and inspect the groove and mating surfaces for any imperfections that could compromise the seal or damage the O-ring. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Automotive Fuel Systems, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||