This Viton O-ring, constructed with a robust Aluminum 6061 housing, delivers exceptional sealing integrity. Engineered for extreme environments, it ensures reliable performance across a wide range of industrial applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 2.708" |
| Outside Diameter | 4.815" |
| Cross Section | 0.259" |
Engineered for reliability and performance, this industrial O-ring features a precisely manufactured Aluminum 6061 body, offering excellent corrosion resistance and structural integrity. Its internal diameter measures 2.708 inches, with an external diameter of 4.815 inches, and a substantial 0.259-inch cross-section. This combination ensures a secure and durable seal in high-pressure and high-temperature applications, making it ideal for demanding fluid and gas management systems where chemical inertness and mechanical strength are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully compress the O-ring to fit within the groove, avoiding excessive stretching or twisting. 3. Verify proper seating and uniform compression across the entire circumference before applying pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently ease the O-ring into the groove, using a lubricant if necessary, to prevent permanent deformation and loss of sealing capability. |
| Installing on a dirty or damaged groove. | Thoroughly inspect and clean the mating groove to remove any contaminants or imperfections that could compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic actuators, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||