This industrial Viton O-ring, constructed from high-grade carbon steel, provides exceptional sealing performance. Designed for critical applications requiring resilience and longevity, it meets stringent industrial demands.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.408" |
| Outside Diameter | 8.264" |
| Cross Section | 0.074" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter of 7.408 inches, an Outside Diameter of 8.264 inches, and a precise Cross Section of 0.074 inches. The inherent properties of Viton, such as excellent resistance to high temperatures, chemicals, and oils, combined with the robust nature of carbon steel, make this seal ideal for demanding environments. Its dimensions ensure a secure and reliable fit, preventing leakage in high-pressure and high-temperature systems common in the chemical processing, automotive, and aerospace industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or residue. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant. 3. Carefully install the O-ring into its designated groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care, avoiding excessive stretching and ensuring it sits flat in the groove without any twists. |
| Using incompatible lubricants or cleaning agents. | Always consult the material compatibility chart for Viton and select lubricants and cleaning agents specifically approved for this elastomer. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||