This industrial-grade Viton O-ring delivers superior sealing performance in extreme environments. Engineered for durability and resilience, it ensures reliable containment across a wide range of demanding applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.902" |
| Outside Diameter | 6.790" |
| Cross Section | 0.162" |
A high-performance industrial component, this Viton O-ring is precisely manufactured with an Inside Diameter of 0.902 inches, an Outside Diameter of 6.790 inches, and a Cross Section of 0.162 inches. Composed of Viton (Fluoroelastomer), it exhibits exceptional resistance to high temperatures, aggressive chemicals, fuels, oils, and solvents, making it ideal for critical sealing applications where reliability is paramount. Its robust material properties ensure long-term performance and prevention of leakage in demanding operational conditions, maintaining seal integrity under pressure and thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, dry, and free from burrs or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent tearing and facilitate installation. 3. Carefully install the O-ring, ensuring it is seated properly within the groove without twisting or overstretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant | Always use a lubricant compatible with Viton and the media being sealed to prevent premature degradation. |
| Overstretching the O-ring during installation | Install the O-ring without excessive stretching to avoid permanent deformation and loss of sealing capability. |
| Installing in a damaged groove | Inspect and repair any nicks, burrs, or scratches on the mating groove surfaces before installation to ensure a proper seal. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||