This industrial Viton O-ring provides robust sealing for critical applications. Its advanced material composition ensures exceptional resistance to harsh chemicals, high temperatures, and aggressive media.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.473" |
| Outside Diameter | 1.294" |
| Cross Section | 0.110" |
Manufactured under strict quality controls, this Viton O-ring boasts an Inside Diameter (ID) of 0.473 inches, an Outside Diameter (OD) of 1.294 inches, and a Cross Section (CS) of 0.110 inches. Composed of Viton (FKM), it offers outstanding resistance to a broad spectrum of chemicals, oils, fuels, and solvents, along with excellent thermal stability up to 400°F (204°C). The inherent low compression set ensures long-term sealing integrity, making it ideal for static and dynamic sealing applications in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant. 3. Install the O-ring into the groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants or sealants. | Always refer to the material compatibility chart for lubricants and ensure they are compatible with Viton (FKM). |
| Over-stretching or twisting the O-ring during installation. | Gently roll or slide the O-ring into the groove to prevent damage to its sealing surface. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any burrs or imperfections before installation. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||