This industrial O-ring, crafted from premium Viton, provides exceptional sealing performance in extreme environments. Its robust design ensures reliable operation and extended service life in critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.303" |
| Outside Diameter | 4.140" |
| Cross Section | 0.182" |
Precision-manufactured to tight tolerances, this Viton O-ring features an inside diameter of 0.303 inches, an outside diameter of 4.140 inches, and a cross-section of 0.182 inches. Viton (FKM) exhibits outstanding resistance to a wide array of chemicals, fuels, oils, and high temperatures (up to 400°F/204°C), making it ideal for applications involving aggressive media and demanding thermal cycling. The material's low compression set ensures sustained sealing force over time.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant (e.g., silicone grease) for easier installation and to prevent damage. 3. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants. | Always use lubricants specifically approved for use with Viton to prevent material degradation. |
| Overtightening fasteners, causing excessive gland compression. | Follow recommended torque specifications for gland closures to avoid over-compression and premature O-ring failure. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive fuel systems, Chemical processing equipment, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||